New Listing Radiomaster MT12 Surface Radio Controller 4in1 Multi-protocol Or ELRS 2.4GH For RC Car Boat
New Listing Radiomaster MT12 Surface Radio Controller 4in1 Multi-protocol Or ELRS 2.4GH For RC Car Boat
SKU:MT12 4IN1 R85C
The RadioMaster MT12 is a pioneering open-source surface radio, and the first surface radio officially supported by EdgeTX, ExpressLRS, and the Multi-module project. Boasting 10 physical inputs and the capability to handle either 16 or 32 channels*, the MT12 is primed for a wide array of surface models, from cars and trucks to boats and beyond. Featuring extensive customizability and a versatile operating system, the MT12 stands out as a highly configurable surface radio, prepared to excel in virtually any scenario.
Features
-
Available with built-in ExpressLRS or 4in1 MPM RF modules
-
Featuring a powerful STM32F407VGT6 with 1MB Flash
-
Preinstalled EdgeTX firmware
-
QC3.0 fast charging supporting 2.0A MAX
-
Compact design with excellent ergonomics
-
Oversized battery compartment - 2 x 18650 cells or a 2s 7.4v 5000mah battery pack (Batteries not included)
-
Standard Nano module compartment
-
RadioMaster standardized button layout
-
Rotatable antenna
-
Customizable base switches or 4 way joystick included
Specification MT12
-
Item: MT12 Surface Radio
-
Physical dimensions: 177.8*118.4*207.8mm
-
Weight: 480 grams
-
Operating frequency: 2.400GHz-2.480GHz
-
Internal RF Options: 4-in-1 multi-protocol / ELRS 2.4GHz
-
Supported protocols: Module dependent
-
Operational current: 160mA for 4in1 / 320mA for ELRS
-
Operational voltage: DC 6.6-8.4V
-
Operating system: EdgeTX
-
Control channels: 16 as standard, ability for expansion 32 Channels (4in1 only)
-
Display: 128*64 Monochrome LCD
-
Battery: 2 x 18650 cells or a 2s 7.4v 5000mah battery pack (Batteries not included)
-
Charging: Built in USB-C Charging
-
Firmware Upgrade method: Via USB or SD card
-
Wheel and Trigger sensor: Hall-effect
-
Module bay: Nano size (RadioMaster Ranger Nano Module / RadioMaster RM 4in1 module / TBS Crossfire Nano module)
-
*32 channels requires a 4in1 radio and additional 4in1 RF module along with compatible receivers
Specification ER3C-i (Included with ExpressLRS version)
-
Item: ER3C-i 2.4GHz ELRS PWM Receiver
-
Power supply: DC 4.5 - 8.4V
-
Antenna type: Built-in high-sensitivity ceramic antenna
-
Wireless protocol: ExpressLRS 3.3.0 pre-installed
-
Output channel: 3CH PWM
-
Telemetry power: 10mW
-
Battery voltage detection range: DC 4.0 - 35V
-
Weight: 4.2 grams
-
Dimensions: 26.1*18.5*13.0 mm
-
Firmware: Device Category: Radiomaster 2.4Ghz / Device: RadioMaster ER3C-i
-
Specification R85C (Included with 4in1 version)
-
Item: R85C Receiver
-
Power supply: DC 4.5 - 8.4V
-
Frequency range: 2400-2483.5Mhz
-
Support protocol: D8/D16/SFHSS
-
Output channel: 5CH PWM
-
Antenna type: high-sensitivity 2.4G antenna
-
Telemetry power: 100mw / 20dbm
-
Weight: 5.7 grams
-
Dimensions: 31.0*18.5*13.0 mm